Search results for "6300":

Propriétés du produit Diamètre interieur 60 mm diamètre extérieur 110 mm Large 22 mm Lester 0,78 kg Écart de température -30 à +120 degrés Classe de tolérance Classe de tolérance P0 / PN ou ABEC 1 Isolation actuelle Non forage trou cylindrique Conception Stockage de lots, anneau intérieur amovible des deux côtés Cage Cage en polyamide Bague extérieure Sans alésage de rainure / lubrification Rangées de lignes camp unique Entrepôt Air à roulement radial normal poésie Aucun, entrepôt ouvert

Anneau extérieur: sans rainure / trou de lubrification Poésie: Aucun, entrepôt ouvert Air des roulements: Air à roulement radial normal Cage: cage polyamide Plage de température: -30 à +120 ° C Classe de tolérance: classe de tolérance P0 / PN ou ABEC 1 Strom Isolation: aucun Alésage: trou cylindrique Rangs de rôle: entrepôt unique BAUForm: stockage de lots, anneau intérieur amovible des deux côtés Poids: 575 grammes Pays de fabrication: Japon Numéro de tarif des douanes: 8482 5000 Ean: non guidé Diamètre intérieur: 50 000 mm Diamètre extérieur: 90 000 mm Largeur: 23 000 mm

NUP210ET d 50 mm Bore diameter D 90 mm Outside diameter B 20 mm Width FW 59.5 mm Raceway diameter of inner ring r (min.) 1.1 mm Chamfer dimension r1 (min.) 1.1 mm Chamfer dimension Cr 85000 N Basic dynamic load rating C0r 76500 N Basic static load rating Thermal Speed Rating (Oil-bath) 8000 min-1 Oil-bath lubrication subject to conditions outlined in ISO 15312 Mechanical (forced-circulation oil) 9000 min-1 Properly designed and controlled forced-circulation oil lubrication Grease 6300 min-1 Grease lubrication Oil (Oil-bath) 7500 min-1 Oil-bath lubrication da (min.) 56.5 mm Diameter of shaft abutment (min) db (min.) 56.5 mm Diameter of shaft / spacer sleeve abutment db (max.) 57 mm Diameter of shaft / spacer sleeve abutment dc (min.) 62 mm Diameter of shaft abutment dd (min.) 67 mm Diameter of shaft abutment Da (max.) 83.5 mm Diameter of housing abutment rb (max.) 1 mm Radius of shaft or housing fillet ra (max.) 1 mm Radius of shaft or housing fillet Mass approx. 0.514 kg Mass approx.

NJ2210ET d 50 mm Bore diameter D 90 mm Outside diameter B 23 mm Width FW 59.5 mm Raceway diameter of inner ring r (min.) 1.1 mm Chamfer dimension r1 (min.) 1.1 mm Chamfer dimension Cr 102000 N Basic dynamic load rating C0r 97000 N Basic static load rating Thermal Speed Rating (Oil-bath) 7500 min-1 Oil-bath lubrication subject to conditions outlined in ISO 15312 Mechanical (forced-circulation oil) 9000 min-1 Properly designed and controlled forced-circulation oil lubrication Grease 6300 min-1 Grease lubrication Oil (Oil-bath) 8000 min-1 Oil-bath lubrication da (min.) 56.5 mm Diameter of shaft abutment (min) db (min.) 56.5 mm Diameter of shaft / spacer sleeve abutment db (max.) 57 mm Diameter of shaft / spacer sleeve abutment dc (min.) 62 mm Diameter of shaft abutment dd (min.) 67 mm Diameter of shaft abutment Da (max.) 83.5 mm Diameter of housing abutment rb (max.) 1 mm Radius of shaft or housing fillet ra (max.) 1 mm Radius of shaft or housing fillet Mass approx. 0.582 kg Mass approx.

NUP212EW d 60 mm Bore diameter D 110 mm Outside diameter B 22 mm Width FW 72 mm Raceway diameter of inner ring r (min.) 1.5 mm Chamfer dimension r1 (min.) 1.5 mm Chamfer dimension Cr 120000 N Basic dynamic load rating C0r 107000 N Basic static load rating Thermal Speed Rating (Oil-bath) 6300 min-1 Oil-bath lubrication subject to conditions outlined in ISO 15312 Mechanical (forced-circulation oil) 9500 min-1 Properly designed and controlled forced-circulation oil lubrication Grease 5300 min-1 Grease lubrication Oil (Oil-bath) 6300 min-1 Oil-bath lubrication da (min.) 68 mm Diameter of shaft abutment (min) db (min.) 68 mm Diameter of shaft / spacer sleeve abutment db (max.) 70 mm Diameter of shaft / spacer sleeve abutment dc (min.) 75 mm Diameter of shaft abutment dd (min.) 80 mm Diameter of shaft abutment Da (max.) 102 mm Diameter of housing abutment rb (max.) 1.5 mm Radius of shaft or housing fillet ra (max.) 1.5 mm Radius of shaft or housing fillet Mass approx. 0.87 kg Mass approx.

NU214ET d 70 mm Bore diameter D 125 mm Outside diameter B 24 mm Width FW 83.5 mm Raceway diameter of inner ring r (min.) 1.5 mm Chamfer dimension r1 (min.) 1.5 mm Chamfer dimension Cr 146000 N Basic dynamic load rating C0r 137000 N Basic static load rating Thermal Speed Rating (Oil-bath) 5600 min-1 Oil-bath lubrication subject to conditions outlined in ISO 15312 Mechanical (forced-circulation oil) 6700 min-1 Properly designed and controlled forced-circulation oil lubrication Grease 5000 min-1 Grease lubrication Oil (Oil-bath) 6300 min-1 Oil-bath lubrication da (min.) 78 mm Diameter of shaft abutment (min) db (min.) 78 mm Diameter of shaft / spacer sleeve abutment db (max.) 81 mm Diameter of shaft / spacer sleeve abutment dc (min.) 86 mm Diameter of shaft abutment dd (min.) 92 mm Diameter of shaft abutment Da (max.) 117 mm Diameter of housing abutment rb (max.) 1.5 mm Radius of shaft or housing fillet ra (max.) 1.5 mm Radius of shaft or housing fillet Mass approx. 1.13 kg Mass approx.

Bang Rows: Entrepôt à deux traits Matériel: Wälzlagerstahl standard Poésie: Aucun, entrepôt ouvert Air de roulement: Air de roulement radial légèrement accru Cage: cage en tôle en acier Plage de températures: -30 à +150 ° C Classe de tolérance: classe de tolérance P0 / PN ou ABEC 1 Alésage: trou cylindrique Anneau intérieur: version standard Poids: 1080 grammes Pays de fabrication: Japon Numéro tarifaire des douanes: 8482 1090 Ean: non guidé Diamètre intérieur: 60 000 mm Diamètre extérieur: 110 000 mm Largeur: 28 000 mm

Technische BasisdatenErweiterte technische Daten Artikelnummer 6200 FAG Auch bekannt als 6200-B6200-C B 9 mm Äußeres Breitenmaße: Äußeres Breitenmaßmm 9,00 C 0r 2.600 N Statische Tragzahl, radial C r 6.300 N Dynamische Tragzahl, radial C ur 177 N Ermüdungsgrenzbelastung, radial Abdichtung Keine Abdichtung Gewicht (kg) 0.032 Innenmm 10,00 Interne Radialluft Cn Normale Innenluft Marke: FAG Spezialbehandlung Keine Spezialbehandlung T max 120 °C Betriebstemperatur max. T min -30 °C Betriebstemperatur min. d =a min 14,2 mm Minimaler Durchmesser der Wellenschulter f 0 12 Berechnungsfaktor n G 37.000 1/min Grenzdrehzahl n ϑr 23.400 1/min Bezugsdrehzahl r a max 0,6 mm Maximaler Hohlkehlradius r min 0,6 mm Minimaler Kantenabstand ≈m 32 g Einzelgewicht

HR32208J ISO 3DC ISO355 dimension series approx. d 40 mm Bore diameter D 80 mm Outside diameter T 24.75 mm Total width B 23 mm Width of inner ring C 19 mm Width of outer ring Cup r (min.) 1.5 mm Chamfer dimension of outer ring (Cup) Cone r (min.) 1.5 mm Chamfer dimension of inner ring (Cone) Cr 95000 N Basic dynamic load rating C0r 90500 N Basic static load rating Grease 4800 min-1 Grease lubrication Oil (Oil-bath) 6300 min-1 Oil-bath lubrication a 18.9 mm Effective load center da (min.) 51 mm Diameter of shaft abutment (min) Db (min.) 75 mm Diameter of housing abutment Da (min.) 68 mm Diameter of housing abutment Da (max.) 71 mm Diameter of housing abutment Sa 3 mm Minimum width of space required in housing on large side face Sb 5.5 mm Minimum width of space required in housing on small side face db (max.) 48 mm Diameter of shaft abutment ra (max.) 1.5 mm Radius of shaft or housing fillet of inner ring ra (max.) 1.5 mm Radius of shaft or housing fillet of outer ring e 0.38 Constant Y0 0.88 Axial load Factors Y1 1.6 Axial load Factors Mass approx. 0.548 kg Mass approx.

NUP2310ET d 50 mm Bore diameter D 110 mm Outside diameter B 40 mm Width FW 65 mm Raceway diameter of inner ring r (min.) 2 mm Chamfer dimension r1 (min.) 2 mm Chamfer dimension Cr 200000 N Basic dynamic load rating C0r 187000 N Basic static load rating Thermal Speed Rating (Oil-bath) 6700 min-1 Oil-bath lubrication subject to conditions outlined in ISO 15312 Mechanical (forced-circulation oil) 8000 min-1 Properly designed and controlled forced-circulation oil lubrication Grease 5000 min-1 Grease lubrication Oil (Oil-bath) 6300 min-1 Oil-bath lubrication da (min.) 59 mm Diameter of shaft abutment (min) db (min.) 59 mm Diameter of shaft / spacer sleeve abutment db (max.) 63 mm Diameter of shaft / spacer sleeve abutment dc (min.) 67 mm Diameter of shaft abutment dd (min.) 73 mm Diameter of shaft abutment Da (max.) 101 mm Diameter of housing abutment rb (max.) 2 mm Radius of shaft or housing fillet ra (max.) 2 mm Radius of shaft or housing fillet Mass approx. 1.78 kg Mass approx.

NU214ET d 70 mm Bore diameter D 125 mm Outside diameter B 24 mm Width FW 83.5 mm Raceway diameter of inner ring r (min.) 1.5 mm Chamfer dimension r1 (min.) 1.5 mm Chamfer dimension Cr 146000 N Basic dynamic load rating C0r 137000 N Basic static load rating Thermal Speed Rating (Oil-bath) 5600 min-1 Oil-bath lubrication subject to conditions outlined in ISO 15312 Mechanical (forced-circulation oil) 6700 min-1 Properly designed and controlled forced-circulation oil lubrication Grease 5000 min-1 Grease lubrication Oil (Oil-bath) 6300 min-1 Oil-bath lubrication da (min.) 78 mm Diameter of shaft abutment (min) db (min.) 78 mm Diameter of shaft / spacer sleeve abutment db (max.) 81 mm Diameter of shaft / spacer sleeve abutment dc (min.) 86 mm Diameter of shaft abutment dd (min.) 92 mm Diameter of shaft abutment Da (max.) 117 mm Diameter of housing abutment rb (max.) 1.5 mm Radius of shaft or housing fillet ra (max.) 1.5 mm Radius of shaft or housing fillet Mass approx. 1.13 kg Mass approx.

Propriétés du produit Diamètre interieur 50 mm diamètre extérieur 90 mm Large 20 mm Lester 0,477 kg Écart de température -30 à +120 degrés Classe de tolérance Classe de tolérance P0 / PN ou ABEC 1 Isolation actuelle Non forage trou cylindrique Rangées de lignes camp unique Conception Stockage de lots, anneau intérieur amovible des deux côtés Bague extérieure Sans alésage de rainure / lubrification Cage Cage en polyamide Entrepôt Air de roulement radial légèrement accru poésie Aucun, entrepôt ouvert

NJ215ET d 75 mm Bore diameter D 130 mm Outside diameter B 25 mm Width FW 88.5 mm Raceway diameter of inner ring r (min.) 1.5 mm Chamfer dimension r1 (min.) 1.5 mm Chamfer dimension Cr 160000 N Basic dynamic load rating C0r 156000 N Basic static load rating Thermal Speed Rating (Oil-bath) 5300 min-1 Oil-bath lubrication subject to conditions outlined in ISO 15312 Mechanical (forced-circulation oil) 6300 min-1 Properly designed and controlled forced-circulation oil lubrication Grease 4800 min-1 Grease lubrication Oil (Oil-bath) 6000 min-1 Oil-bath lubrication da (min.) 83 mm Diameter of shaft abutment (min) db (min.) 83 mm Diameter of shaft / spacer sleeve abutment db (max.) 86 mm Diameter of shaft / spacer sleeve abutment dc (min.) 90 mm Diameter of shaft abutment dd (min.) 96 mm Diameter of shaft abutment Da (max.) 122 mm Diameter of housing abutment rb (max.) 1.5 mm Radius of shaft or housing fillet ra (max.) 1.5 mm Radius of shaft or housing fillet Mass approx. 1.28 kg Mass approx.

NJ210ET d 50 mm Bore diameter D 90 mm Outside diameter B 20 mm Width FW 59.5 mm Raceway diameter of inner ring r (min.) 1.1 mm Chamfer dimension r1 (min.) 1.1 mm Chamfer dimension Cr 85000 N Basic dynamic load rating C0r 76500 N Basic static load rating Thermal Speed Rating (Oil-bath) 8000 min-1 Oil-bath lubrication subject to conditions outlined in ISO 15312 Mechanical (forced-circulation oil) 9000 min-1 Properly designed and controlled forced-circulation oil lubrication Grease 6300 min-1 Grease lubrication Oil (Oil-bath) 7500 min-1 Oil-bath lubrication da (min.) 56.5 mm Diameter of shaft abutment (min) db (min.) 56.5 mm Diameter of shaft / spacer sleeve abutment db (max.) 57 mm Diameter of shaft / spacer sleeve abutment dc (min.) 62 mm Diameter of shaft abutment dd (min.) 67 mm Diameter of shaft abutment Da (max.) 83.5 mm Diameter of housing abutment rb (max.) 1 mm Radius of shaft or housing fillet ra (max.) 1 mm Radius of shaft or housing fillet Mass approx. 0.498 kg Mass approx.

Matériel: Wälzlagerstahl standard Cage: cage en tôle en acier Plage de températures: -30 à +150 ° C Classe de tolérance: classe de tolérance P0 / PN ou ABEC 1 Portée de l'article: uniquement des roulements à billes de rainure axiale, sans sous-couche (n) Direction de la Weic: un acteur à un versant Ajustement de l'angle: ne peut pas être ajusté les angles Poids: 24 grammes Pays de fabrication: Japon Numéro tarifaire des douanes: 8482 1010 Ean: non guidé Diamètre intérieur: 15 000 mm Diamètre extérieur: 28 000 mm Largeur: 9 000 mm